Precision Ground, With special cutting geometry, Finish die/mold steels, all ferrous and non ferrous materials and carbon graphite. Minimum size available available is diameter 6mm. Hard die steels up to 63HRC can be machined using these inserts.

Side cutting, with positive ground chip breaker and non chip breaker type. Best for cavity and core profiling, and for blending of fillets and softer materials and non chip breaker design will cater to hard Die/Mold steels up to 63 HRC.

Precision Ground, with positive ground chip breaker and non chip breaker type. Best for cavity and profile milling of soft and die/mold steels and for all stainless steel, aerospace nickel and titanium alloys and the non chip breaker design will cater to hard Die/Mold steels up to 63 HRC.

Precision ground, with positive ground chip breaker and non chip breaker type. Flat Bottom insert for shoulder milling, fillet finishing and long reach angular wall finishing of softer materials and the non chip breaker design will cater to hard die/mold steels up to 63 HRC.

Precision ground center cutting bull nose insert. Excellent choice for tip milling with larger step-overs and for profile milling of pre-hard and fully hard die steels, cast steel, cast iron, carbon graphite, etc. Some plunging capability, Strong cutting edge design. Hard Die/Mold steels of up to 63 HRC can be machined using this insert.

   Precision ground, cutting on center, for semi-finish and finish milling. Excellent choice for unattended finish milling at small depth and high speed and feed rates. Hard Die/Mold steels of up to 64 HRC can be machined using this insert.

      This uniquely designed insert has a negative draft at the back of the insert which makes it perfectly suitable for steep wall machining where normal solid carbide tools cause problems of rubbing on the portion already machined thus causing heavy friction and spoiling the finish on already machined portion. Precision ground, with positive ground chip breaker and non chip breaker type. Used for milling of cores, cavities, fillets with straight or very steep walls of softer materials and non chip breaker design for hard materials.

Typical usage is in the mold base pockets and bore machining with circular interpolation. These can also be used on parts which have deep but steep walls where the generation of friction is more owing to rubbing of solid carbide shank.  It is also used in aerospace industry where there are many cases of steep wall machining on difficult to machine materials such as titanium and nickel based alloys.

Precision Ground, with high positive ground chip breaker and clearance. Use this aggressive, positive insert on all non-ferrous materials (Aluminium, brass, copper, graphite, etc.). When using these inserts, cutting speeds as high as 1000m/min can be used depending on the application and the material. The capability of you machine tool is the only limit for the performance and productivity of this insert.
 

Moldstar range of Solid Micro-Grain carbide endmills are one of the best products on offer in the market. The use of ultra-fine grain premium carbide substrate material designed specifically for smaller, high performance tools, coupled with the most advanced, proprietary EXALON ALTiN based coating has demonstrated superior performance characteristics over an impressive list of world wide competitors in die-mold milling. Hard Die/Mold steels of up to 63 HRC can be machined using these tools.
 

Millstar range of tool holders which go with the Millstar carbide inserts are one of the largest selection for roughing and finishing Ballnose, back draft, flat bottom and toroid milling . Tool shanks are inherently balanced for high spindle speeds. Machine with confidence at increased speeds and velocities dictated by modern high velocity machining.
 

Better rigidity for longer tool life and improved surface finish. Excellent for longer reach applications.
 

Inch standard tools are available in the standard product line. Please request for catalogue if you are interested. Special holders and solid tools as well as left hand tools can be made to order upon request. Please check for availability.